OĞUZ EROLAI·ADS·APPS
Google Ads

Budget Optimisation | Redistributing Budget Across Campaigns

11 min read

I move existing budget to the campaign whose cost per qualified enquiry is low and which is losing impressions because of budget; I take it from the campaign whose cost is high and which cannot spend its budget anyway. The decision rests on two measures: cost per enquiry the sales team counts as qualified, and the “Search lost IS (budget)” column (IS = impression share). Total budget stays the same, and each move is made on its own. The biggest trap is giving budget to a campaign that loses impressions because of rank: it cannot spend the money. How I calculate the first budget is covered in Google Ads budget guidance.

How do you tell a campaign is limited by budget?

I read it in two places: the “Limited by budget” campaign status and the impression share columns. According to Google Ads Help (read on 2026-11-02):

  • “Limited by budget” status: Google applies it in two cases: when a campaign underperforms because of a limited budget, or when it uses “Maximize clicks” and traffic could grow by adjusting the budget. On the Campaigns page, filter > Statuses > Limited by budget lists them. (Limited by budget)
  • Impression share: impressions received ÷ estimated impressions you were eligible for. Found under Columns > Competitive metrics. (Get impression share data)
  • Search lost IS (budget): the percentage of time your ads were not shown on the Search Network because of insufficient budget. Available at campaign level only.
  • Search lost IS (rank): the percentage of time your ads were not shown on the Search Network because of poor Ad Rank in the auction.

According to Google, impression share is an estimate and small fluctuations do not call for action; a ”—” can appear when data is insufficient, and data processing can take 24–48 hours. (About impression share) So I look at an average over at least a few weeks, not a single day.

One warning: Google advises against using the “Lost IS (budget)” column with “Maximize conversions” and “Maximize conversion value”. Those strategies are built to spend the full daily budget, so they count as “limited by budget” by design, and the column does not account for that (Google Ads Help, read on 2026-11-02). For those campaigns I use the budget simulator. The method below is for “Maximize clicks” or manually bid campaigns; I assume the four example campaigns work that way.

Which loss calls for which fix?

Budget loss is fixed with budget and rank loss with Ad Rank; mixing them up moves money to the wrong campaign. I diagnose with this table:

SituationWhat it meansWhat I do
High budget loss, low cost per enquiryThe campaign works but runs out of moneyGive it budget
High budget loss, high cost per enquiryMoney runs out, but the traffic is poor tooClean search terms first, no extra budget
High rank loss, low budget lossBid or ad quality falls shortLook at ads, landing page and bids
Both low, high cost per enquiryThe campaign spends its budget but does not workCut its budget and give that share to another campaign

Ad quality and relevance come into play in rank loss; how they are measured is covered in quality score. On bids Google adds a note: in a campaign marked “Limited by budget”, lowering bids slightly can reduce the average cost per click and bring more clicks for the same budget; lowering them too far reduces clicks, and Google suggests checking performance after a few days. The page does not name a bid strategy; it applies where you can adjust bids by hand (that last part is my inference). (Tips for optimising your budget)

Example: four campaigns, one move

The figures below are a fictional example I built for an industrial weighing systems manufacturer. To avoid amounts I treat total monthly spend as 100 units; one unit is 1% of total spend. There are four Search campaigns, last 30 days:

CampaignSpend share and qualified enquiriesLost IS: budget / rankCost per qualified enquiry
Brand10% · 6 enquiries0% / 5%1.67 units
Truck scales30% · 9 enquiries38% / 12%3.33 units
Filling scales25% · 3 enquiries5% / 40%8.33 units
Generic “scales”35% · 2 enquiries0% / 55%17.5 units

Account total: 20 qualified enquiries, 5.00 units per enquiry. Reading it:

  • Truck scales costs less per enquiry than the account average and loses 38% of its impressions to budget. This is the campaign to give budget to.
  • Generic “scales” spends its budget, has no budget loss, and costs 3.5 times the account average per enquiry. This is the campaign to take budget from.
  • Filling scales loses to rank (40%). Giving it budget would not raise its spend; I leave it alone until ads and the page are fixed.
  • Brand brings the cheapest enquiries, but they come from people who already know the company. I do not race brand against new-customer campaigns on the same measure; I keep its share.

One change: the Generic “scales” share drops from 35% to 20% and Truck scales rises from 30% to 45%. Total budget stays the same and no other setting changes. In the next 30 days (fictional): Truck scales brings 12 qualified enquiries and its budget loss falls from 38% to 14%; Generic “scales” brings 1. Account total: 22 enquiries at 4.55 units each, a drop of about 9.1%.

I read this result carefully. Truck scales’ cost per enquiry rose from 3.33 to 3.75 units. The added 15 units brought 3 more enquiries, so each extra enquiry cost 5.00 units: more than Truck scales’ own average (3.33), equal to the account average (5.00). The same move took 15 units from Generic “scales” and lost 1 enquiry; the net result is 2 extra enquiries on the same budget. As budget keeps growing, the marginal cost can rise. I draw no rate from the generic campaign’s drop from 2 to 1; numbers that small swing on one good or bad week. Season and competitors may also have changed during those 30 days; to tie the result to the move alone I watch at least one more period.

Why make only one change at a time?

If you move budget, add negatives and change the bidding strategy in the same week, you cannot tell which one produced the result; so I make the budget move on its own. On Smart Bidding Google corrects a common belief: according to its page on the Smart Bidding learning period, budget changes take effect immediately and do not trigger the “Learning” status; that status comes from a new strategy, campaigns being added or removed, and conversion goal changes. (Learning period) So the reason for the one-change rule is not that the algorithm breaks; it is that your measurement stays readable.

Pausing and restarting a campaign may be different: Google says a re-enabled bid strategy enters “Learning”. For a temporary cut I lower the budget instead of pausing the campaign.

When do you use a shared budget?

A shared budget is one average daily budget shared by campaigns that serve the same goal; Google automatically moves the unspent share to a campaign that is capped by budget. (About shared budgets)

Limits to know (Google Ads Help, 2026-11-02):

  • Available only for Search, Shopping, Display and video campaigns; not compatible with Performance Max, campaigns that are part of an experiment, or campaign total budgets.
  • Path: Tools > Budgets and bidding > Shared budgets. If you switch mid-day from an individual budget to a shared one (or back), Google starts as if the campaigns had spent nothing that day. (Manage a shared budget)
  • Google states that advertisers using shared budgets with portfolio bid strategies on Search see 13% more conversions on average; the source is Google’s own data (global, 2024–2025).

I would not use a shared budget in the example account. Google moves unspent money to campaigns that are capped by budget; in the example those are campaigns with budget loss, such as Truck scales. Generic “scales” has no budget loss, only rank loss. I found nothing saying the reallocation uses your qualified-enquiry data, so I see a risk of money drifting from a campaign that brings cheap enquiries to a costly one (my inference). Google also lists using shared budgets with a portfolio bid strategy as best practice. I consider shared budgets for campaigns in the same product family that bring enquiries of the same quality.

How do you judge Google’s budget recommendations?

Google’s budget recommendations rest on missed traffic or on conversion simulations. It knows the enquiries your sales team counts as qualified only if you upload them to Google Ads as conversions; otherwise it sees only the conversions you track. The “Bidding and budgets” group on the Recommendations page has these budget-related recommendations (Google Ads Help, Recommendation types, 2026-11-02; the list is not exhaustive, the page lists other recommendations that affect budget indirectly):

  • Raise your budgets: shown when you missed 5% or more of your potential traffic last week.
  • Raise budgets for upcoming traffic increases: shown when simulations indicate you could miss 5% or more of next weeks’ potential traffic at the current budget.
  • Move unused budgets: shown when your ads stopped on your busiest days and another campaign has unspent budget; it suggests moving that budget to the campaign that needs it. The threshold is again 5% of last week’s potential traffic.
  • Adjust your budgets: for “Maximize conversions” campaigns, shown when simulations indicate more conversions for a relatively small increase in cost per conversion.

(Recommendation types)

“Move unused budgets” is Google’s version of the work in this article, but it judges which budget is “unused” in terms of traffic. Before applying it I check the cost per qualified enquiry of the campaign losing budget; taking money from a campaign that brings cheap enquiries but had a quiet week is the reverse of the example’s mistake. Before accepting a budget recommendation, I check where the same campaign’s spend goes with a spend map.

Where do bidding and measurement fit into this decision?

A budget move is only reliable when qualified enquiries are measured. Cost per qualified enquiry = the campaign’s spend for the period ÷ enquiries from that campaign that the sales team counted as qualified. For that I keep the GCLID (the code Google attaches to an ad click), written into a hidden form field, in the enquiry log and upload qualified enquiries as offline conversions; if you are in Turkey, phone enquiries cannot be connected this way. Bidding strategy is not the subject here; I do not move to Smart Bidding before measurement is in place.

Points I have not verified: I did not find in detail how Google splits unspent money among campaigns in a shared budget. I did not find on Google’s page whether “Move unused budgets” uses conversion data when choosing which campaign to take budget from. I did not find a clear statement on whether pausing and re-enabling a campaign falls under Google’s “re-enabled strategy”. The weighing systems manufacturer and all figures are fictional.

For Google Ads management, write to me via the contact page. The first meeting is paid.

Frequently Asked Questions

How often should I redistribute the budget?

Not on a fixed schedule but once enough data has built up. I do not move budget without a few weeks of impression share averages in the campaigns involved and at least 8–10 qualified enquiries per campaign; fewer than that carries the luck of a single week.

Can I cut the brand campaign and move its budget to new-customer campaigns?

If the brand campaign has no budget loss, its budget is not the constraint: cutting it either changes nothing or removes the cheapest enquiries of the period. I do not switch brand off without measuring how many of those searches reach you through organic results when your ad is absent.

What happens to monthly spend if I move budget mid-month?

According to Google, if the budget changes during the month, spending for the rest of the month aims at the new daily budget × the remaining calendar days, and daily spend does not exceed twice the new budget. There is no need to wait for the start of the month, but I count the evaluation from the day of the change.

Back to top ↑
WHAT YOU CAN ASK FOR

How do I work?
Work-hour packages

Tell me about your business and what you need on WhatsApp or by phone; we agree on a work block of somewhere between 5 and 40 hours and I start doing what is needed. What you get is not a calendar window — it is net working hours spent directly on your business. I can use 40 hours working three days straight, or deliberately spread it out and finish it over a year — whatever the work calls for. I do not spend my time estimating how long something will take, I spend it doing the work; every hour I spend leaves a lasting result in your business. We keep going for as long as you find it useful.

WORK BLOCKS

Why not monthly?
Is 40 hours a week?

On a fixed monthly fee both sides are watching the wrong thing: you watch a fixed cost, the other side watches how many more contracts like this they can line up. Working by the hour puts us both in front of the same thing — the real value of the work that got done. I know not having an upfront answer to "how much will this cost in total?" is the natural cost of this model. But instead of paying a fixed fee for months to a setup that is not producing results, you only pay for the qualified time spent on your work — and you see exactly where that time went, start to finish. That is why my clients keep coming back.

5hours300€ + VAT60€ per hourChoose this block
10hours500€ + VAT50€ per hourChoose this block
20hours800€ + VAT40€ per hourChoose this block
40hours1,400€ + VAT35€ per hourChoose this block